Home ProductsTungsten Carbide Round Bar

YG6X Tungsten Carbide Rods / Wood Cutting Tools Tungsten Carbide Rounds

YG6X Tungsten Carbide Rods / Wood Cutting Tools Tungsten Carbide Rounds

    • YG6X Tungsten Carbide Rods / Wood Cutting Tools Tungsten Carbide Rounds
    • YG6X Tungsten Carbide Rods / Wood Cutting Tools Tungsten Carbide Rounds
  • YG6X Tungsten Carbide Rods / Wood Cutting Tools Tungsten Carbide Rounds

    Product Details:

    Place of Origin: Hunan, China (Mainland)
    Brand Name: Fei Rui
    Certification: ISO9001:2008
    Model Number: Various

    Payment & Shipping Terms:

    Minimum Order Quantity: 10kg
    Price: Be discussed separately
    Packaging Details: Cemented Tungsten Carbide Rods/Round Bar package:plastic box, brown paper box, wooden case
    Delivery Time: Cemented Tungsten Carbide Rods/Round Bar delivery time:about 20~30 days after order comfirmed
    Payment Terms: T/T, Western Union, MoneyGram
    Supply Ability: 50 tons per month
    Contact Now
    Detailed Product Description
    Product Name: Factory Supply YG6X Tungsten Carbide Rod For Wear Part Material: 100% Virgin Tungsten Carbide
    Applications: Stone Working/metal Working/wood Working/wear Part OEM & ODM: Acceptable
    Supply Ability: 50 Ton/Tons Per Month Tungsten Carbide Bar Grade: K30 For Tungsten Carbide Round Bar
    Type: Hand Tool Parts

    [ Product Name ]

    Factory Supply YG6X Tungsten Carbide Rod for Wear Part

     

    [How Carbide Powder is Pressed]

    1.Tungsten carbide shapes are made from a powder which is typically tungsten, carbon, cobalt and wax to bind it all together.

     

    2.Carbide shapes are made three ways; pressing in a die, "whittling" a shape from a green piece of carbide or grinding a shape from a finished piece of carbide.


    3.This is a carbide press. At top is a ram. The powder is poured into the press cavity (the die) then the ram comes down and compresses the powder. Once the powder is fully pressed the top ram withdraws. There is a second ram at the bottom of the cavity that comes up and pushes the part out of the cavity.


    4.The pressed parts are then presintered. In this step the wax is melted out. This leaves a piece of "green carbide" or "green state carbide". Since the wax has been melted out it is just powder pressed together. It is actually weaker than side walk chalk. It can be machined easily in this state although great care is required.

     

    5.It is at this step that carbide parts get chipped edges. Some parts, such as saw tips, are made in large and very large batches. They are moved by conveyors and often poured into trays for final sintering. If this not done carefully one square edge impinging on another can cause chipped edges in the carbide parts. By contrast you can use a .410 shotgun to fire fully sintered saw tips at a concrete block wall without damaging the saw tips.

     

    6.The final step is sintering in which the carbon is forced into a relaxed tungsten matrix creating tungsten carbide grains and those grains are enveloped in a binder or matrix of cobalt of similar.

     

    7.During the final sintering the parts shrink dramatically. Exactly how much shrinkage will occur is difficult to predict exactly. Parts are usually designed to be produced a bit oversize.

     

    [Quick Features]

    1. High wear resistance.
    2. 5000 PCS sell a month.
    3. Various types available.
    4. ISO9001:2008,CQC.
    5.Supply YG6X tungsten carbide rod
    6.18 tons output a month

     

    [Material composition of Factory Supply YG6X Tungsten Carbide Rod for Wear Part]
    1.Physical Properties:
    A) Hardness greater than or equal to 92.8 HRA;
    B) Density greater than or equal to 14.2 g/cm³;
    C) TRS greater than or equal to 4200 N/mm²;
    D) Free of ETA phase condition;
    E) No contamination by other materials;
    F) Porosity = A00 / B00 / C00 ;
    G) Uniform and consistent grain size. No grain size can be larger than specified.
    H) Chromium carbide grain growth inhibitor only.
    2.All the production, coatings are used in Germany, Switzerland, processing equipment;
    3.It's proposed cutting less than 60HRC
     

    [Grade of Factory Supply YG6X Tungsten Carbide Rod for Wear Part]

    Grade Density g/cm³ Hardness HRA TRS (Mpa) Applications and performance recommended
    YG6 14.9 89.5 2150 With good wear resistance , suitable for hard wood, prosesisng original wood, bress rods, and cast iron
    YG8 14.6 89 2320 Used for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
    YL10.2 14.5 92.5 3400 Wear resistance and strength comparatively higher,suitable for processing cast iron, non-ferrous metal

     

    [Quality control of Factory Supply YG6X Tungsten Carbide Rod for Wear Part]
    1. All raw materials are tested in terms of density, hardness and T. R. S before use.
    2. Every piece of product goes through in-process and final inspection.
    3. Every batch of product can be traced.

     

    [Packing of Factory Supply YG6X Tungsten Carbide Rod for Wear Part]

    In common:
    Firstly use inner boxes,then to outer boxes or do as customer requested.

     

    [Shipping Methods]
    Shipment methods:By air or sea,DHL,UPS,FEDEX,TNT or as your resquest.

     

    [Production Process of Stock Polished or Unpolished Cemented Tungsten Carbide Rods/Round Bar]

    YG6X Tungsten Carbide Rods / Wood Cutting Tools Tungsten Carbide Rounds

     

    [Company Brief Introduction]

    Zhuzhou Ruili Tools Co.,Ltd was established in the Chinese largest tungsten carbide producing area,Zhuzhou city,Hunan province.
    With years of manufacturing experience,advanced equipments,as well as strict quality control system,we can offer all kinds of carbide products in high quality,competitive price and quick delivery.
    Our products linies covers tungsten carbide strips/bars, carbide rods for machine tools, carbide knife shapener,carbide saw tips,carbide welding tips,etc.and customized items which are widely used in machinary,mining,construction,oil & drill,industrial engineering,etc.
    Most of our products are exported to US,Russia,Europe,Japan,Taiwan,South-east Asia and so on
    Welcome to contact and visit us for more details,we are always here waiting for you.

     

    [Competitive Advantage]

    10 years manufacture experience in tungsten carbide
    Implement strict quality testing and control procedure to make superior quality. (ISO9001)
    Fexible payment terms(L/C, T/T, western union,money gram, etc.)

    Reply your inquiry within 10 hours

    We are professional factory, so our price is lower than others
    Professional sales person

    Perfect Oral English communication service

     

    [Any question or requirement , please feel free to contact us,we are glad to help you]

    Contact Details
    Zhuzhou ruili tools CO.,LTD.

    Contact Person: Cherry Liu

    Send your inquiry directly to us (0 / 3000)

    Other Products